Fixed Line endings

print/Rectlinear.ini

@@ -1,99 +1,99 @@
-# generated by Slic3r 1.3.0 on 
+# generated by Slic3r 1.3.0 on 
-adaptive_slicing = 0
+adaptive_slicing = 0
-adaptive_slicing_quality = 75%
+adaptive_slicing_quality = 75%
-avoid_crossing_perimeters = 1
+avoid_crossing_perimeters = 1
-bottom_infill_pattern = rectilinear
+bottom_infill_pattern = rectilinear
-bottom_solid_layers = 3
+bottom_solid_layers = 3
-bridge_acceleration = 0
+bridge_acceleration = 0
-bridge_flow_ratio = 1
+bridge_flow_ratio = 1
-bridge_speed = 60
+bridge_speed = 60
-brim_connections_width = 0
+brim_connections_width = 0
-brim_width = 5
+brim_width = 5
-compatible_printers = 
+compatible_printers = 
-complete_objects = 0
+complete_objects = 0
-default_acceleration = 0
+default_acceleration = 0
-dont_support_bridges = 1
+dont_support_bridges = 1
-external_perimeter_extrusion_width = 0
+external_perimeter_extrusion_width = 0
-external_perimeter_speed = 50%
+external_perimeter_speed = 50%
-external_perimeters_first = 1
+external_perimeters_first = 1
-extra_perimeters = 1
+extra_perimeters = 1
-extruder_clearance_height = 20
+extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_radius = 20
-extrusion_width = 0
+extrusion_width = 0
-fill_angle = 45
+fill_angle = 45
-fill_density = 20%
+fill_density = 20%
-fill_gaps = 1
+fill_gaps = 1
-fill_pattern = honeycomb
+fill_pattern = honeycomb
-first_layer_acceleration = 0
+first_layer_acceleration = 0
-first_layer_extrusion_width = 200%
+first_layer_extrusion_width = 200%
-first_layer_height = 0.3
+first_layer_height = 0.3
-first_layer_speed = 25%
+first_layer_speed = 25%
-gap_fill_speed = 20
+gap_fill_speed = 20
-gcode_comments = 0
+gcode_comments = 0
-infill_acceleration = 0
+infill_acceleration = 0
-infill_every_layers = 1
+infill_every_layers = 1
-infill_extruder = 1
+infill_extruder = 1
-infill_extrusion_width = 0
+infill_extrusion_width = 0
-infill_first = 0
+infill_first = 0
-infill_only_where_needed = 0
+infill_only_where_needed = 0
-infill_overlap = 15%
+infill_overlap = 15%
-infill_speed = 80
+infill_speed = 80
-interface_shells = 0
+interface_shells = 0
-interior_brim_width = 0
+interior_brim_width = 0
-layer_height = 0.2
+layer_height = 0.2
-match_horizontal_surfaces = 0
+match_horizontal_surfaces = 0
-max_print_speed = 80
+max_print_speed = 80
-max_volumetric_speed = 0
+max_volumetric_speed = 0
-min_skirt_length = 0
+min_skirt_length = 0
-notes = 
+notes = 
-only_retract_when_crossing_perimeters = 0
+only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
+ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
+output_filename_format = [input_filename_base].gcode
-overhangs = 1
+overhangs = 1
-perimeter_acceleration = 0
+perimeter_acceleration = 0
-perimeter_extruder = 1
+perimeter_extruder = 1
-perimeter_extrusion_width = 0
+perimeter_extrusion_width = 0
-perimeter_speed = 50
+perimeter_speed = 50
-perimeters = 3
+perimeters = 3
-post_process = 
+post_process = 
-print_settings_id = 
+print_settings_id = 
-raft_layers = 0
+raft_layers = 0
-regions_overlap = 0
+regions_overlap = 0
-resolution = 0
+resolution = 0
-seam_position = nearest
+seam_position = nearest
-shortcuts = support_material
+shortcuts = support_material
-skirt_distance = 6
+skirt_distance = 6
-skirt_height = 1
+skirt_height = 1
-skirts = 1
+skirts = 1
-small_perimeter_speed = 15
+small_perimeter_speed = 15
-solid_infill_below_area = 70
+solid_infill_below_area = 70
-solid_infill_every_layers = 0
+solid_infill_every_layers = 0
-solid_infill_extruder = 1
+solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
+solid_infill_extrusion_width = 0
-solid_infill_speed = 20
+solid_infill_speed = 20
-spiral_vase = 0
+spiral_vase = 0
-standby_temperature_delta = -5
+standby_temperature_delta = -5
-support_material = 0
+support_material = 0
-support_material_angle = 0
+support_material_angle = 0
-support_material_buildplate_only = 0
+support_material_buildplate_only = 0
-support_material_contact_distance = 0.2
+support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
+support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 1
-support_material_extrusion_width = 0
+support_material_extrusion_width = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 1
-support_material_interface_extrusion_width = 0
+support_material_interface_extrusion_width = 0
-support_material_interface_layers = 3
+support_material_interface_layers = 3
-support_material_interface_spacing = 0
+support_material_interface_spacing = 0
-support_material_interface_speed = 100%
+support_material_interface_speed = 100%
-support_material_max_layers = 0
+support_material_max_layers = 0
-support_material_pattern = pillars
+support_material_pattern = pillars
-support_material_spacing = 2.5
+support_material_spacing = 2.5
-support_material_speed = 60
+support_material_speed = 60
-support_material_threshold = 60%
+support_material_threshold = 60%
-thin_walls = 1
+thin_walls = 1
-top_infill_extrusion_width = 0
+top_infill_extrusion_width = 0
-top_infill_pattern = rectilinear
+top_infill_pattern = rectilinear
-top_solid_infill_speed = 15
+top_solid_infill_speed = 15
-top_solid_layers = 3
+top_solid_layers = 3
-travel_speed = 130
+travel_speed = 130
-xy_size_compensation = 0
+xy_size_compensation = 0