diff --git a/filament/Fillamentum Black.ini b/filament/Fillamentum Black.ini
index a52e037..4d5428d 100644
--- a/filament/Fillamentum Black.ini	
+++ b/filament/Fillamentum Black.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.1-dev on 2021-06-04 18:25:38
+# generated by Slic3r 1.3.0 on 
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -9,7 +9,7 @@ extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #000000
-filament_cost = 68.8
+filament_cost = 72
 filament_density = 1.24
 filament_diameter = 1.75
 filament_max_volumetric_speed = 0
diff --git a/filament/Fillamentum Clear.ini b/filament/Fillamentum Clear.ini
index f50c216..b5f4523 100644
--- a/filament/Fillamentum Clear.ini	
+++ b/filament/Fillamentum Clear.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.1-dev on 2021-06-01 13:58:15
+# generated by Slic3r 1.3.0 on 
 bed_temperature = 70
 bridge_fan_speed = 100
 compatible_printers = 
@@ -9,7 +9,7 @@ extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #FFFFFF
-filament_cost = 80
+filament_cost = 86.4
 filament_density = 1.24
 filament_diameter = 1.75
 filament_max_volumetric_speed = 0
diff --git a/filament/Fillamentum Sky Blue.ini b/filament/Fillamentum Sky Blue.ini
new file mode 100644
index 0000000..15c12e7
--- /dev/null
+++ b/filament/Fillamentum Sky Blue.ini	
@@ -0,0 +1,25 @@
+# generated by Slic3r 1.3.0 on 
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #0080FF
+filament_cost = 72
+filament_density = 1.24
+filament_diameter = 1.75
+filament_max_volumetric_speed = 0
+filament_notes = ""
+filament_settings_id = 
+first_layer_bed_temperature = 60
+first_layer_temperature = 200
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; Filament gcode\n"
+temperature = 200
diff --git a/printer/Creality Ender 3 Pro.ini b/printer/Creality Ender 3 Pro.ini
index 48b9f50..a80ecc0 100644
--- a/printer/Creality Ender 3 Pro.ini	
+++ b/printer/Creality Ender 3 Pro.ini	
@@ -25,7 +25,7 @@ retract_lift_above = 0
 retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 80
+retract_speed = 50
 serial_port = /dev/ttyUSB0
 serial_speed = 115200
 start_gcode = G28 ; home all axes\nG1 Z0 ; lift nozzle\nG4 P10000; wait 10 sec for user clean up\n
@@ -36,6 +36,6 @@ use_set_and_wait_bed = 0
 use_set_and_wait_extruder = 0
 use_volumetric_e = 0
 vibration_limit = 0
-wipe = 1
+wipe = 0
 z_offset = 0
 z_steps_per_mm = 0