Initial Commit

printer/Creality Ender 3 Pro.ini

@@ -0,0 +1,41 @@
+# generated by Slic3r 1.3.1-dev on 2021-08-17 22:21:59
+bed_shape = 0x0,220x0,220x220,0x220
+before_layer_gcode = 
+between_objects_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
+extruder_offset = 0x0
+gcode_flavor = reprap
+has_heatbed = 1
+host_type = octoprint
+layer_gcode = M117 Layer [layer_num]; Show layer number
+max_layer_height = 0.3
+min_layer_height = 0.15
+nozzle_diameter = 0.4
+octoprint_apikey = 
+pressure_advance = 0
+print_host = 
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 2
+retract_layer_change = 0
+retract_length = 5
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 80
+serial_port = /dev/ttyUSB0
+serial_speed = 115200
+start_gcode = G28 ; home all axes\nG1 Z0 ; lift nozzle\nG92 E0; set extruder distance to 0\nG1 E-2 F1800; retract 2mm at 1800mm/min\nG92 E0; set extruder distance to 0\nG4 P10000; wait 10 sec for user clean up\nG1 Y25 F5000; move away from the clip\n
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_set_and_wait_bed = 0
+use_set_and_wait_extruder = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 1
+z_offset = 0
+z_steps_per_mm = 0

printer/InitLab Mendel.ini

@@ -0,0 +1,41 @@
+# generated by Slic3r 1.3.0 on 2020-09-12 14:15:56
+bed_shape = 0x0,190x0,190x150,0x150
+before_layer_gcode = 
+between_objects_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
+extruder_offset = 0x0
+gcode_flavor = reprap
+has_heatbed = 1
+host_type = octoprint
+layer_gcode = 
+max_layer_height = 0.3
+min_layer_height = 0.15
+nozzle_diameter = 0.5
+octoprint_apikey = 
+pressure_advance = 0
+print_host = 
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 3
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+serial_port = 
+serial_speed = 250000
+start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_set_and_wait_bed = 0
+use_set_and_wait_extruder = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 1
+z_offset = 0
+z_steps_per_mm = 0