nedko/slic3r-config
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Commit Graph

  • 1549c5e1ea Fix NonOilen master nedko 2025-01-05 15:33:59 +02:00
  • 044a5b37d8 Added Fillamentum NonOilen nedko 2025-01-04 15:33:12 +02:00
  • d177155cd4 Renamed filaments nedko 2023-05-21 22:13:42 +03:00
  • e2f5a0de2d Removed fast print nedko 2023-04-14 13:40:57 +03:00
  • 075703e0b8 Reverted to known good settings nedko 2023-03-17 09:44:40 +02:00
  • 5c5705d2a3 Reverted first layer to 200% nedko 2023-03-16 21:46:29 +02:00
  • 2894040d79 Changed perimeters to 0.4mm. Fillamentum - 50 bed on later layers nedko 2023-03-16 15:48:48 +02:00
  • 33619e375f Increased perimeter width nedko 2023-03-08 22:34:24 +02:00
  • c2c7516f2f Changed Slow and Normal to have better perimeter adhesion. Added Fast speed nedko 2023-02-17 12:55:44 +02:00
  • f642ff769f Changed supports to honeycomb DocWibbleyWobbley 2023-01-10 22:34:41 +02:00
  • b467006052 Increased first layer to 0.3 DocWibbleyWobbley 2022-03-23 12:03:18 +02:00
  • 8a1ad78ff5 Added Slow print setting DocWibbleyWobbley 2022-03-15 19:20:48 +02:00
  • 34a74a98d0 Removed extra retraction. Reduced first layer to 0.2 DocWibbleyWobbley 2022-03-14 22:34:15 +02:00
  • 56eb38d923 Changed seams to aligned DocWibbleyWobbley 2022-02-17 19:03:19 +02:00
  • 606389712f Added extra 0.1mm after retraction DocWibbleyWobbley 2022-01-28 21:22:37 +02:00
  • 973ff92c8a Added wiping DocWibbleyWobbley 2022-01-08 02:02:53 +02:00
  • 38e4cbdb20 Increased first layer speed from 25% to 50% DocWibbleyWobbley 2022-01-08 01:15:26 +02:00
  • 1df5a4359e Removed different print settings DocWibbleyWobbley 2021-12-21 19:24:29 +02:00
  • 730da01e5c Reduced support speed DocWibbleyWobbley 2021-11-22 21:08:56 +02:00
  • b0784f38b5 Added retraction on layer change DocWibbleyWobbley 2021-11-16 15:28:21 +02:00
  • cf4f5bd200 Added Sky Blue Filament. Adjusted filament cost. Removed wipe. DocWibbleyWobbley 2021-11-07 16:50:37 +02:00
  • b47a86419c Added support preset Removed retraction at start DocWibbleyWobbley 2021-09-23 12:30:12 +03:00
  • a8d7ebc20a Reduced starting retraction from 2mm to 0.5mm DocWibbleyWobbley 2021-08-29 14:05:16 +03:00
  • 0a21135f89 Fixed Line endings DocWibbleyWobbley 2021-08-28 19:23:09 +03:00
  • ffbb0a79aa Fixed 1st layer speed to 25% DocWibbleyWobbley 2021-08-28 19:22:16 +03:00
  • ae061dee0a Changed first layer speed to 50% DocWibbleyWobbley 2021-08-27 16:42:05 +03:00
  • e7b51f530f Initial Commit DWW 2021-08-18 01:26:00 +03:00