Fix NonOilen

filament/Fillamentum NonOilen.ini

@@ -2,24 +2,24 @@
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
-cooling = 1
-disable_fan_first_layers = 3
+cooling = 0
+disable_fan_first_layers = 0
 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
-filament_colour = #0080FF
-filament_cost = 72
-filament_density = 1.24
+filament_colour = #FFFFFF
+filament_cost = 96
+filament_density = 1.2
 filament_diameter = 1.75
 filament_max_volumetric_speed = 0
 filament_notes = ""
 filament_settings_id = 
 first_layer_bed_temperature = 60
-first_layer_temperature = 200
+first_layer_temperature = 185
 max_fan_speed = 100
-min_fan_speed = 35
+min_fan_speed = 100
 min_print_speed = 10
 slowdown_below_layer_time = 5
 start_filament_gcode = "; Filament gcode\n"
-temperature = 200
+temperature = 185

filament/Fillamentum PLA Crystal Clear.ini

@@ -1,5 +1,5 @@
 # generated by Slic3r 1.3.0 on 
-bed_temperature = 70
+bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
 cooling = 1
@@ -15,7 +15,7 @@ filament_diameter = 1.75
 filament_max_volumetric_speed = 0
 filament_notes = ""
 filament_settings_id = 
-first_layer_bed_temperature = 80
+first_layer_bed_temperature = 60
 first_layer_temperature = 220
 max_fan_speed = 100
 min_fan_speed = 35

print/Normal.ini

@@ -52,7 +52,7 @@ output_filename_format = [input_filename_base].gcode
 overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
-perimeter_extrusion_width = 0
+perimeter_extrusion_width = 200%
 perimeter_speed = 50
 perimeters = 3
 post_process = 
@@ -60,7 +60,7 @@ print_settings_id =
 raft_layers = 0
 regions_overlap = 0
 resolution = 0
-seam_position = nearest
+seam_position = aligned
 shortcuts = support_material
 skirt_distance = 6
 skirt_height = 1
@@ -86,7 +86,7 @@ support_material_interface_layers = 3
 support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_max_layers = 0
-support_material_pattern = pillars
+support_material_pattern = honeycomb
 support_material_spacing = 2.5
 support_material_speed = 40
 support_material_threshold = 60%

print/Slow.ini

@@ -0,0 +1,99 @@
+# generated by Slic3r 1.3.0 on 
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 30
+brim_connections_width = 0
+brim_width = 5
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 50%
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 20%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.3
+first_layer_speed = 50%
+gap_fill_speed = 10
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 40
+interface_shells = 0
+interior_brim_width = 0
+layer_height = 0.2
+match_horizontal_surfaces = 0
+max_print_speed = 40
+max_volumetric_speed = 0
+min_skirt_length = 0
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 200%
+perimeter_speed = 25
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = aligned
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 7.5
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 10
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = honeycomb
+support_material_spacing = 2.5
+support_material_speed = 20
+support_material_threshold = 60%
+thin_walls = 1
+top_infill_extrusion_width = 0
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 7.5
+top_solid_layers = 3
+travel_speed = 130
+xy_size_compensation = 0